BOLT ACTION RIFLE SERVICES:
Rebarrel Customers Rifle -
- Includes Chamber - Thread - Crown - Engrave (caliber) - $200.00
- Magnum Chambering - Add $25.00
- Spiralock threads - Add $50.00
- Extractor cut in barrel tennon for controlled feed actions - Add $50.00
Recommended:
- Accurize Rem style action: Single point remachine action and bolt, double sleeve bolt body, new recoil lug. Open lug for larger tennon. - $375.00
- Accurize Win style actions: Single point remachine action and bolt, double sleeve bolt body - $325.00
- Single point remachine action and bolt - $185.00
- Double sleeve bolt - $175.00
- Light weight speedlock firing pin - Add $60.00
- Sako extractor with install - $125.00
- VAIS stainless steel muzzle brake installed - includes cost of brake - $185.00
- Drill/tap per hole - $20.00
- Lap Barrel - $130.00
- Jewel Trigger installed - includes cost of trigger - $235.00
- Win 70
- Rem 700
- Anshultz 5018 2 stage adustible trigger - $450.00
- Rem 700 or Win 70 - Tune factory Remington trigger includes spring kit - $50.00
- Trigger adjustment (with adjustment screws) - $30.00
- Pillar bedding - Includes aluminum pillars, epoxy bed action and epoxy pad under chamber, free float from pad forward, action screws forward to 45 inch pounds - $180.00
- Scope mounting - reticle square to center line of action, all screws torqued to manufacturers specification, semi-permanent attachment of bases to receiver (will not come loose) - $50.00
- As above, plus ream scope rings - $75.00
Metal finishing
- Matte blue- $150.00
- Mil-spec parkerizing manganese phosphate - $150.00
- Cerakote - single color - $250.00
- Cerakote - two color - $275.00
- Cerakote - three colors standard camo - 3-colors - $300.00
Factory rifle accurizing
- Pillar bed action, free float barrel, lap barrel, recrown at 11 degrees, lap locking lugs, jewell trigger adjusted to 2 lbs, mount scope semi-permanent - $650.00
Please remove these items prior to shipment or coming into the shop: sling, swivels, ammunition holders and bipods. If I'm not performing any work on the scope, rings or bases, please remove these items as well.
SERVICE RIFLES:
SPRINGFIELD 1903,1903A3 RIFLES
Most of the work I perform on these rifles is restoration and replacing lost or broken parts. Please email, describing what you need and I will give you a price qoute. I DO NOT convert these rifles into sporting rifles.
REBARREL 1903
I WILL NOT REBARREL A LOW SERIAL NUMBER 1903 RIFLE, email for more details.
- Krieger GI contour barrel only in chrome moly steel $315.00
- Fit above barrel to your action, match grade Chambering 30/06, crown at 11 degrees or GI Crown $185.00
Rebarrel 1903A3
- Ocassionaly new GI barrels are available, if not I will have to turn from a blank. Email your needs and I will give a price qoute.
- Restock 1903 or 1903A3 -Types of wood available: American Walnut, English and Bastogne. They also come in different Grades Standard not much if any figure in the wood, fancy has good figure, then extra fancy has even more, for more info on wood selection, email the type and grade of wood you want and I will email the cost of the wood.
- Price to make the stock NOT INCLUDING the wood. Hand rubbed satin oil finish includes handguard. $550.00
- Clean and Refinish original stock. Hand rubbed satin oil finish. $400.00
- Mil-spec Parkerizing Manganese Phosphate $150.00
- Hot-Caustic Bluing Matte or 400 ground finish $150.00
- Pillar-Bed NOT MATCH LEGAL $180.00
M1 GARAND
- Krieger GI contour or heavy match contour $340.00
- Fit barrel to your action, lap bolt lugs, match grade Chambering 30/06,.308 Win or .308 Palma, crown at 11 degrees or GI crown. $185.00
- Route rear handguard necessary to fit heavy contour barrel $20.00
- RESTOCK I only work with the different types of WALNUT, NO Laments, Beech or Birch, I need to know what type of Walnut, American, English or Bastogne. Then the grade of wood, standard not much if any figure, fancy has good figure and extra fancy has even more, email this information and I can qoute the price for the wood.
- Price to make the stock not including the wood, hand rubbed satin oil finish includes both handguards. $600.00
- GLASS BED STOCK Set proper tension on barrel, screw and glass lower band to front handguard, ream front handguard to clear barrel,rout rear handguard. $225.00
- Clean and refinish original stock $400.00
- Trigger job 4½ lbs minimum $50.00
- Wolff spring kit - Includes all the springs in the rifle (how old are your springs?) Installed $55.00
- Wolff spring kit purchased in conjunction with Rebarrel, Restock, Glassbed. $25.00
- Mil-Spec Parkerizing Manganese Phosphate $175.00
- Hot Caustic Bluing Matte $175.00
SPRINGFIELD ARMORY M1A/M14
I WILL ONLY WORK THE ABOVE MENTIONED RIFLE, I DO NOT WORK ON THE CLONES.
- Krieger GI contour or heavy Match contour $340.00
- Fit barrel to your action Match grade chambering .308 win or .308 Palma crown at 11 degrees or GI crown, lapping bolt lugs also fitting op rod guide gas cylinder and flash suppresor $185.00
- Install Mcmillan fiberglass stock needs to be bedded. Glass Bed stock set proper tension on barrel, open up stock ferrule, epoxy ferule to stock. $225.00
- RESTOCK I only work with the different types of WALNUT, NO Laments, Beech or Birch, I need to know what type of Walnut, American, English or Bastogne. Then the grade of wood, standard not much if any figure, fancy has good figure and extra fancy has even more, email this information and I can qoute the price for the wood.
- Hand rubbed satin oil finish includes wood hand guard $550.00
- Hand rubbed satin oil finish with synthetic handguard $500.00
- Clean and Refinish original stock $400.00
- Glass Bed stock set proper tension on barrel, open up stock ferrule, epoxy ferule to stock. $225.00
- Wolff spring kit incudes all springs in rifle (how old are your springs?) $55.00
- Wolff spring kit purchased in conjunction with rebarrel, restock, glassbed $27.15
- Trigger job 4½ lbs $50.00
- Mil-spec parkerizing Manganese Phosphate $175.00
- Hot Caustic Bluing Matte or 400 ground finish $175.00
AR-15 Barrel
- Krieger H-bar DCM without muzzle threads $290.00
- Barrel Krieger H-bar DCM with muzzle threads $330.00
- Barrel Krieger Varmatch choose muzzle diameter .720,.812 or .920 new gas block is supplied up to 26 A finished length $340.00
- Barrel Krieger Varmatch as above but with 28" finished length will require longer gas tube. $360.00
- Gas tube Longer gas tube required for 28" barrel $20.00
- Barrel/Chambering and fitting/installing to your upper $170.00
- Many Barrel options are available for this rifle, if you would like a different barrel installed such as douglas, shilen, dpms..... email your request for pricing.
- Float tube $135.00
- Float tube install (No charge if rebarreling) $50.00
- Daniel Defense rails/handguards are available, above install prices apply
- Geissele NM Trigger Small Pin 1st stage 3.2 - 5 lbs 2nd .5 - 1.5 $279.00
- Geissele Match rifle Trigger Small or Large Pin 1st stage 1.3 - 5 lbs 2nd 4 - 14oz. $279.00
- Jewell Trigger Small or Large Pin 1st stage 1-3.5 lbs 2nd stage .5 - 3.5 lbs $203.00
- Install/Adjust Geissele or Jewell Trigger $50.00
- Trigger job Rework factory trigger 4½ lb minumum $50.00
- Non-rotating hammer & trigger pin set small or large diameter $32.00
- Oversize non-rotating pin set & installation (requires reaming pin holes in receiver) $52.00
- Trigger adjustment screw recommended when reworking factory trigger $44.20
- Wolff spring kit includes all springs used in rifle $34.99
- Bed Upper receiver to Lower $30.00
Service rifles can be configured in so many different ways from competetion to tactical and even hunting,the ar-15 makes an excellent varmint rifle. The above list is some of the more frequent work requests that I receive and is not intended to be all inclusive. Need something not listed? Send me an email - Accuracy First LLC can handle all your service rifle needs.
Quality optics available from:
Leupold, Swarovski, and Night Force